Content
- Mowing in rainy weather - How to mow wet grass
- Lawn mowing in rainy weather - important requirements at a glance
- How to mow wet lawn properly
- Tips
Lawn can also be mowed when it is wet
Mowing in rainy weather - How to mow wet grass
Day-long rainy weather with summery temperatures lets the lawn shoot up rapidly. Mowing wet grass has long been frowned upon by gardeners. In fact, you can cut moist grass very well if you pay attention to the following instructions.
Lawn mowing in rainy weather - important requirements at a glance
So that wet grass gives a uniform picture after the cut, these important requirements must be observed in advance:
Before you start the mowing, you should still strengthen yourself. Cutting wet grass requires significantly more effort than you spend on dry grass.
How to mow wet lawn properly
If you have started the engine, please run directly behind the lawnmower. Kick wet blades of grass before cutting, do not straighten up for a long time and can not be caught by the knives. If damp grass collects in the collecting basket, the weight increases rapidly, so that the wheels sink visibly deeper. Therefore, pause more often to empty the basket.
Wet clippings often get caught in the knife bar. Do not wait until the engine stutters as a result. Turn off the mower, pull the spark plug connector, and remove the wet grass from the blades. Always tilt the mower so that the spark plug and air filter are facing up.
The setting for maximum cutting height makes mowing in rainy weather much easier. If the grass seems too high for you, lower the wheels by one step. Never cut the noble grasses shorter than 4 to 5 cm. Even in rainy weather, use the golden one-third rule: cut off a maximum of one third of the grass on lawn grasses.
Tips
Wet grass is a special strain on all components in the lawnmower. Therefore, clean the mower thoroughly after each use. Include the air filter with it, which can be cleaned in a few simple steps. Take a look at the condition of the spark plug on this occasion. Black-brown deposits on the contacts can be removed with a brush.