Content
- Remove moss from patio tiles - what really helps?
- soda
- 1. The ideal time
- 2. Preparations
- 3. Combat
- potassium permanganate
- 1. Prepare solution
- 2. Check effect
- 3. Combat
- Kärcher
With a Kärcher moss can be removed well
Remove moss from patio tiles - what really helps?
Gas burners, high-pressure cleaners and scraping brushes are the typical tools for removing moss. Those who do not own these devices can resort to alternative budgetary means. There are ways that are environmentally friendly and do not damage the material.
This helps with moss removal:
soda
Soda is suitable as a natural mineral for removing moss. Its effect unfolds when cleaning paving stones, concrete and natural stones.
1. The ideal time
Choose a day when there is no rain. Also in the following days should be no rain, otherwise the effect of this method is minimized.
2. Preparations
Loosen dense moss pad with a scraper and remove the remains. Prepare a solution of ten liters of boiling water and 15 to 20 grams of soda.
3. Combat
Spread the mixture on the patio slabs with a puller and let the liquid work for at least five hours. The effect increases if you wait several days. Remove the moss after the exposure time with a scrubber.
potassium permanganate
This potassium salt, dissolved in water, provides an effective moss control agent for limestone and natural stones such as granite or marble.
1. Prepare solution
Heat ten liters of water to the boiling point and mix 15 grams of potassium permanganate. Wear gloves when mixing and stirring. The mixture turns brownish to purple.
2. Check effect
Test in a visible location, if the agent is suitable for the substrate. Potassium permanganate causes discoloration on bright stones. For wood, the agent is unsuitable.
3. Combat
Pour the solution on the patio slabs. The exposure time is at least five hours. Then scrub the plates with plenty of water and rinse with clear water.
Kärcher
An effective method for removing moss is an industrial vacuum cleaner that can absorb both dry material and water. This measure is suitable for any surface and is particularly effective when the moss has become saturated with water. Remove the bag and leave the filter in the device. Move the nozzle directly over the moss-covered areas. The large negative pressure pulls the pads off the plates. Then fill empty joints with sand.