Content
- How To Use A Grass Trimmer Correctly - Tips & Tricks
- Prepare lawn trim properly - you should pay attention to this
- Safe and effective use of trimmers - that's how it works
- Tips
When grass trimming is logical to proceed
How To Use A Grass Trimmer Correctly - Tips & Tricks
Wherever a lawn trimmer is on hand, the cut of the lawn edge and the border of the bedding succeed in no time at all. The useful gardening tool certainly has its pitfalls. Especially the rapidly rotating thread can cause problems. These tips tell you how to use a brush cutter properly.
Prepare lawn trim properly - you should pay attention to this
As a rule of thumb for the proper use of a lawn trimmer applies: first mow the lawn and then trim the edges. Before you start working with the brush cutter, check the thread bobbin and the motor head for movement. Have a spare spool or spare knife ready. Nothing is more annoying than interrupting the trimming work to get a replacement at the nearest hardware store.
Make sure the power supply is running smoothly. For an electric lawn trimmer, the extension cord should cover the entire work area. Accumulators should be fully charged. On gasoline-powered brushcutter a full tank is recommended.
Safe and effective use of trimmers - that's how it works
Sturdy footwear and durable clothing are among the most important criteria if you want to use a lawn trimmer properly. Ideally, trouser legs and sleeves are firmly attached to the body, so that nothing can get tangled in the running device. Please put on protective goggles, as the rotation can throw branches and small stones around. How to use your grass trimmer professionally:
If you are working on the trimmer head, switch off the device completely beforehand. For example, if the thread breaks, first pull the plug, remove the battery, or disconnect the spark plug cable before re-threading the thread or changing the bobbin.
Tips
If an electric lawn trimmer does not start, a lack of power is the problem. On the other hand, if a petrol-powered brush cutter consistently refuses to work, you can not avoid a thorough analysis. Lack of fuel, incorrectly set choke and dirty spark plug have emerged as top 3 of the most common causes.