Content
- Seal the garden pond when the water level drops
- Eliminate leaks at the garden pond
- What to do if the foil pond leaks?
- Tips
Finding the leak in the garden pond is the hardest task
Seal the garden pond when the water level drops
With excessively high water loss, sealing the garden pond is particularly important, since otherwise the biological balance gets out of joint. In order to locate all leaks, planting and fish must first be evacuated before complete sealing of the walls and soil.
Primarily slightly older ornamental oaks tend to leak over the years, especially if they are made of concrete and form the first hairline cracks. But also foil oak show some signs of aging and can quickly seep larger amounts of water. For bricked ponds, it is sometimes difficult to Safe to locate leaks, If only the floor area is affected, applying an extra layer of clay can help. Which in turn means that many or even all plants and animals must first be evacuated from the pool to the garden pond.
Eliminate leaks at the garden pond
If the water is drained and the bottom is cleared, the search for cracks can begin. Often, through-grown roots are the cause of damage, which should now be somewhat easier to recognize. Experience has shown that sealing the garden pond only leads to lasting success when the entire pond is renovated, instead of mending just a few damaged areas, Since a general repair would usually be feasible only with an unreasonable amount of time, material and money, offers for concrete ponds a seal with high-quality films as possible. The specialized trade holds for it several kinds ready, the most common consist of:
What to do if the foil pond leaks?
Again, a thorough cleaning is required first to find out what kind of pond liner it is when it is to be repaired by gluing or welding. Repairs will only be successful if they are made with the same material and, in addition, the film thickness is identical. Furthermore, make sure that the connection points of the film webs overlap as generously as possible. Starting at the edge of the pond and with sufficient overhang, the film is first laid over the embankment in the direction of the groove and floor to the opposite side - web by web. The protruding ends can be sunk into the ground or behind an additional fairing be hidden.
Tips
If you want to seal a cuboid garden pond, the tracks are best cut to pas. The inflows and outflows of the pond must be carefully insulated from the foil so that no water seeps into the soil uncontrolled later.