Content
- Lift the garden house, how can this work?
- The preparatory work
- Required materials
- method
- It's easier with a crane
- What to do if the house can not be raised?
- Tips
Prefabricated garden houses can u.U. raise
Lift the garden house, how can this work?
The floor under the arbor has settled, and the house is now wrong. You may also want to redesign the garden and put the tool shed in a different location. There are many reasons why the garden house as a whole has to be raised. With a little preparation and some helping hands, this usually works without any problems.
The preparatory work
Required materials
Since this act of strength is not negotiable for a person, ask neighbors and friends for help.
method
First lift the house with the wooden wedges so that you can place the jack under it. Lever up the arbor so that you can push in stable wooden beams.
If the garden house is stable on top of this, you can put the jack back on and raise the house to the required height. Always inferior boards and beams.
It's easier with a crane
If the garden shed is too big to lift with hydraulic jacks, you can rent a mobile crane from a local transport company. Remember, however, that this requires a suitable parking space and sufficient space.
What to do if the house can not be raised?
Then unfortunately only the dismantling remains. You do not have to disassemble the garden house into all its parts. It is usually possible to dismantle the roof as a whole and the side walls in large pieces, so that the subsequent assembly is quite fast.
Tips
You can lend the shunting jack required for this action at low cost in many hardware stores. Some models undercut a ground clearance of ten centimeters. As a result, relatively small wedges are sufficient to get under the house with the devices.