Content
- Seal stump - How to make stump last longer
- Which means to seal oneself?
- Seal the stump properly
- Tree stump grow
- Seal stump with varnish
- Tree stump as a table base
- Tips
There are several ways to seal a stump
Seal stump - How to make stump last longer
If you want to integrate a stump in the garden as a decoration, this should last as long as possible to defy wind and weather. How can the tree stump be sealed in an environmentally friendly way so that it does not decompose so quickly?
Which means to seal oneself?
First and foremost, the places where the tree was felled must be sealed. Moisture and bacteria, which decompose the wood, penetrate the interfaces very easily. As a means to offer:
First of all, it depends on which tree species it is. Some types of wood are very weather-resistant and can handle wet conditions well. They must be painted only with oil or varnish.
Softer woodwork needs repeated treatment until it is sealed. In addition the garden trade offers suitable means. Be sure to use only non-toxic solutions to preserve the stump. This is especially important when children and pets use the garden.
Seal the stump properly
The stump should be dried for some time if possible. Find a time when there is no rain for a long time to allow the seal to harden. You may need to apply wet protection after sealing.
Apply linseed oil or wood varnish with a brush. Sometimes you have to repeat the sealing after a few days.
Tree stump grow
Tree wax is available from specialist retailers. It is applied to the interface with a spatula. The thicker the mass, the longer it takes for the wax to harden.
Seal stump with varnish
If you want to decorate the tree stump to decorate the garden with decorative objects, it is usually sufficient if you paint the stump on a dry day with wood varnish.
Tree stump as a table base
If you want to use the tree stump as a foot for a table, you do not need to seal it. By applying the table top of the stump is protected from moisture.
Tips
One way to easily seal a stump is to use wood glue that is slightly thinned. This mixture is applied to the as dry as possible interface of the stump. After that, the glue only needs to dry well.