Build waterfall for stream yourself - That's how it works

Posted on
Author: John Pratt
Date Of Creation: 9 April 2021
Update Date: 1 July 2024
Anonim
Build waterfall for stream yourself - That's how it works - Garden
Build waterfall for stream yourself - That's how it works - Garden

Content



A stream of rocks looks very natural

Build waterfall for stream yourself - That's how it works

A brook can flow gently through the garden - and finally tumble down a mountain with a roaring noise and then end in the garden pond. Such a waterfall is not only a visual highlight, but also improves the water quality significantly: The strong movement of the water is enriched with plenty of oxygen, which greatly simplifies the pond care.

manual

There are many ideas for how to build and design such a waterfall. You can make it out of concrete, using earth and pond liner or a wooden scaffold.It can be built steeply falling or rippling down in gentle steps - this is entirely up to your personal taste and the local conditions. In this guide you will find an easy-to-implement variant that can be implemented even by less experienced home improvement.

Required materials

For the construction of this waterfall you need the following materials:


The required quantities depend on how big the waterfall should be and are therefore not mentioned here.

Creating the hill

Of course, as a waterfall always falls from an elevated spot, you must first create one. To do this, you pour a mound of earth, for which you can, for example, use the excavation of a pond construction. The soil should be well consolidated so that the hill does not slip later. Keep in mind that the hill can not be higher than the incoming stream - water does not flow uphill, at least not without technical support. Therefore, the stream should flow from the top of the hill, with a slope of two to three percent is completely sufficient. The garden pond, into which the water flows, is again at the lowest point.

Model waterfall

Once this preparatory work has been completed, you can now start building the waterfall:

Tips

Do not lay the return hose underneath the mound - once it has been repaired, you will have to remove the entire hill and the waterfall.